 |
|
 |
|
 |
| Luxurious Separate Operator Cabin: Thus entire floor area can be utilized. |
|
No jerks & smooth travel in hoists: Very low vibrations due to movement by Wire Rope.
|
|
Power Saving: As only 1 motor of 10.5 KW is required & VFD of Schneider Electronic is supplied as standard. |
| |
|
|
|
|
 |
|
 |
|
 |
| No compromise in safety: As we provide same rack centrifugal braking system as in R&P Hoist which stops the hoist in event of free-fall. |
|
Entry Gate: ‘Sliding Upwards’ design gives it advantage of full area utilisation. |
|
Exit Gate with Landing Platform & Railing: Design of upper half door going up & bottom half door acts as a bridge between Hoist cage & building thereby preventing accidents. |
| |
|
|
|
|
 |
|
 |
|
 |
Cage with perforated steel
plates: These are provided
for increasing strength & life of cage. |
|
Floor Selector: It's a standard feature which eases the use for the operator for accurate
landing. |
|
Base Enclosure: the hoist will start only after closing the door of case enclosure. It prevents any accidents caused by trespassing. |
| |
|
|
|
|
 |
|
 |
|
 |
Limit Switches:
1. Trap Door Limit Switch.
2. Exit Door Limit Switch.
3. Top Limit Switch.
4. Bottom Limit Switch.
5. Entry Door Limit Switch |
|
Steel Carrying Attachment: To carry rods vertically up to 6-8 meters. |
|
Overload Cut off Alarm:
provide to prevent overloading of Hoist. |
| |
|
|
|
|
 |
|
 |
|
|
End Mast: The last mast is
provided without rack to prevent cage coming out from mast. |
|
Buffer spring: These are provided at the bottom for
safe & smooth touch down. |
|
|
| |
|
|
|
|
