Electrical Braking:
The Bar Bending Machine comes with Electrical Braking, which eliminates cost of maintenance of mechanical brakes. Thus no maintenance cost unlike mechanical brakes
Limit Switch:
The machine has two limit switches at both sides (front and back). The limit switch is used to restrict the rotation of bend wheel over 360 degrees. This allows getting the exact bend at a selected angle
Branded Electrical Components:
The bending machine has all the Branded electrical components. It comes with delay
timer and rectifier . With delay timer , the return operation is delayed for safety reasons.
ZZ Bearing & Oil Seal:
It is provided in gear box. It prevents dust particles & iron powder to percolate in the gear box. It keeps the oil in gear box clean, thereby adding life to machine & cost saves.
Foot Pedal:
The machine is operational only when the foot pedal is kept pressed and once the foot is removed, the machine stops, thus providing safe operations. It also comes with foot guard cover for higher safety from hazards at construction
Circuit Diagram:
The Circuit diagram is given on inside of Panel Door. It comes with quick reference of components, wire, specifications of components, spare part number, codes etc. hence helping you to diagnose the fault without any loss of time thus saving your time, money & energy .
Hardened Plates:
Hardened Plates: The hardened plate
supports the blade from behind and helps
in sliding the bars. The hardened plate
ensures no gap develops between the
body & cutting blade. It also keeps the
blade in good shape for long time.
Dynamically Balanced Flywheel:
The
machine is fitted with dynamically
balanced flywheel . Thus, it gives
minimum vibration and less noise while
cutting bars. This ensures long life of
machine’s moving parts
Schneider make DOL Motor Starter with PFR:
Schneider make DOL Motor Starter with
PFR: These branded starters with phase
failure relay prevents motor damage
through phase reversal, high & low
voltage, thus ensuring longer motor life.
Hand lever with Heavy Duty Spring:
Hand lever with Heavy Duty Spring: The
hand lever design has been made on the
push concept with heavy duty return
spring. So that the operator will have less
fatigue, less efforts and better efficiency .
Gearing Arrangement:
Gearing Arrangement: 2 Stage gear setup
to give better torque efficiency thereby
reducing the load on cutting blade&
increasing life of cutting blade. The entire
cutting process becomes smooth.
Monolithic Steel Structure:
Monolithic Steel Structure: Spartan's
newly launched premium series of Cutting
machines are designed in a monolithic
steel structure using higher thickness of
steel plate so the number of welding joints
in the body are minimal which ensures
better design strength of body and longer
life of the machine.